/ Industrial & Engineering Instruments / Mechanical Engineering Equipments / Mechanical Operation Labs /

Plate & Frame Filter Press

Rs. 0 / Piece

Product Code MT-MO-131
Condition New
Stock Status Stock In
Minimum Order Quantity 1
DESCRIPTION Pressure filters can apply a large pressure differential across the septum to give economically rapid filtration with viscous liquids or fine solids. The most common types of pressure filters are filter press. A filter press contains a set of plates designed to provide a series of chambers or compartments in which solids may collect. The plates are covered with a filter medium such ascanvas cloth. Slurry is admitted to each compartment under pressure; li...
Interested in this AD
Get in touch with Seller

Product Description

DESCRIPTION

Pressure filters can apply a large pressure differential across the septum to give economically rapid filtration with viscous liquids or fine solids. The most common types of pressure filters are filter press. A filter press contains a set of plates designed to provide a series of chambers or compartments in which solids may collect. The plates are covered with a filter medium such ascanvas cloth. Slurry is admitted to each compartment under pressure; liquor passes through the canvas cloth and out a discharge pipe, leaving a wet cake of solids behind. Plates and frames sit horizontally in a metal rack, with cloth covering the face of each plate, and aresqueezed tightly together by a screw. Slurry enters at one end of the assembly of plates and frame. It passes through a channel running lengthwise through one corner of assembly. The set up consists of 7 plates and 6 frames. Frames are covered with filter cloth. Feed is fed by gear pump at the top and filtrate collected at the bottom from each plate by operating the cock. After removing cake, washing and cleaning can be done by water provided by overhead tank. Inlet & outlet pressures are measured by pressure gauges. Rate of filtrate removals is measured by calibrated tank provided.

Technical Details

No. of frame 6
No. of Plates 7
Size 200 mm x 200 mm.
Material Acrylic
Filter Medium Filter Cloth
Filtrate collection tray Material Stainless Steel, Suitable size.
Filtration rate measurement Using measuring tank. Material Stainless Steel
Slurry Feed tank Material Stainless Steel, Capacity 40 Ltrs.
Slurry Tank Agitator Stainless Steel Impeller with SS Shaft coupled to FHP Motor and Reduction Gear Box
Slurry Feed Pump Gear Pump with FHP motor.
iping system GI and PVC.
Pressure Measurement By Bourdon type pressure gauge-2Nos.
Overhead water tank Material Stainless Steel, Capacity 25 Ltrs.
Control Panel comprises of Standard make on off switch, Mains Indicator etc.
  • Screw Jack arrangement for tightening and removing of frames easily.
  • An ENGLISH instruction manual consisting of experimental procedures, block diagram etc. will be provided along with the Apparatus.
  • The whole set-up is well designed and arranged on a rigid structure painted with industrial PU Paint.

EXPERIMENTATION / LEARNING  OBJEACT

  • To study the operation of filter press in the laboratory.
  • To evaluate specific cake resistance and medium resistance.

UTILITES REQUIRED

  • Electric Supply: Single phase, 220 V AC, 50 Hz, 5-15 amp combined socket with earth connection. Earth voltage should be less than 5 volts.
  • Floor area: 1.0 m x 0.5 m
  • Water supply.
  • Drain.
  • Ca CO3 for Slurry

Latest Products


Follow Videos