/ Industrial & Engineering Instruments / Mechanical Engineering Equipments / Mechanical Operation Labs /

Froth Flotation Cell

$ 0 / Piece

Product Code MT-MO-125
Condition New
Stock Status Stock In
Minimum Order Quantity 1
DESCRIPTION Mixed liberated particles can be separated from each other by floatation if there is sufficient difference in their wet-ability. The floatation process operates by preparing a water suspension of a mixture of relatively finely sized solids. This is usually done in an agitated chamber open at the top. Fine bubbles of air are then dispersed through the agitated suspension to form a froth that rises to the top of the chamber. Particles that are radially wet...
Interested in this AD
Get in touch with Seller

Product Description

DESCRIPTION

Mixed liberated particles can be separated from each other by floatation if there is sufficient difference in their wet-ability. The floatation process operates by preparing a water suspension of a mixture of relatively finely sized solids. This is usually done in an agitated chamber open at the top. Fine bubbles of air are then dispersed through the agitated suspension to form a froth that rises to the top of the chamber. Particles that are radially wetted by water (hydrophilic) tend to remain in the water suspension. Those particles that are not easily wetted (hydrophobic) tend to be collected at the air bubble-water interface and rise to the surface attached to air bubbles. Thus differences in the surface chemical properties of the solids are the basis for separation. The set up consists of a agitated chamber open at the top. In the chamber, an impeller coupled to a shaft is fixed in a stationary diffuser. Low-pressure air is allowed to enter in the stationary diffuser through the air passage provided with the agitator. The collector coated mineral particles adhere to the rising bubbles and are carried to the top of the cell to be removed in the froth product.

  Technical Details

Flotation Chamber Material Stainless Steel, Compatible capacity.
Agitator Stainless Steel Impeller with Stainless Steel shaft coupled to FHP motor.
Diffuser Material Stainless Steel holding the impeller.
Froth Collecting Tank Material Stainless Steel, Capacity 15 Ltrs.
Air Supply By Air pump, Compatible capacity.
Control Panel comprises of Standard make on off switch, Mains Indicator etc.
  • An ENGLISH instruction manual consisting of experimental procedures, block diagram etc. will be provided along with the Apparatus.
  • The whole set-up is well designed and arranged on a rigid structure painted with industrial PU Paint.

EXPERIMNTATION / LEARNING OBJACT

  • To study the performance of Froth Flotation Cell.
  • To find % recovery of mineral in froth from a standard mixture.

UTILITIES  REQUIRED 

  • Electric Supply: Single phase, 220 V AC, 50 Hz, 5-15 amp combined socket with earth connection. Earth voltage should be less than 5 volts.
  • Floor Area 1.5 m x 1 m.
  • Water Supply & Drain.
  • Material for Feed, Frothing agents and collectors.
  • Oven for drying of product.  

Latest Products


Follow Videos