/ Industrial & Engineering Instruments / Mechanical Engineering Equipments / Heat & Mass Transfer Lab /

Forced Draft Tray Dryer

$ 0 / Piece

Product Code MT-MT-142
Condition New
Stock Status Stock In
Minimum Order Quantity 1
Description This is a dryer in which moisture removal takes place by means of forced draft action created by hot air. The set-up consists of an insulated double wall chamber. Inside the chamber a tray is attached directly to a electronic weighing balance, which is fitted on the bottom, outside the chamber. Material for drying is placed in the tray and regular loss of weight is monitored. Air from a blower passes through a heating chamber and is used as drying agent....
Interested in this AD
Get in touch with Seller

Product Description

Description

This is a dryer in which moisture removal takes place by means of forced draft action created by hot air. The set-up consists of an insulated double wall chamber. Inside the chamber a tray is attached directly to a electronic weighing balance, which is fitted on the bottom, outside the chamber. Material for drying is placed in the tray and regular loss of weight is monitored. Air from a blower passes through a heating chamber and is used as drying agent. Arrangement is done to vary the airflow rate.

Technical Details  

Drying Chamber  Material Stainless Steel, Size (30 x 30 x 30) cm insulated by Ceramic wool and housed in a MS Chamber. Maximum Temperature 120°C.
Weighing Balance Digital (0-1000gm) of ± 1 gm resolution.
Hot Air Circulation By forced draft fan, Arrangement is done to vary the air flow rate.
Heating Chamber Compatible capacity.
Heater Nichrome Wire Heater.
Temp. Sensor TD PT – 100 Type
Control panel comprising of 

Digital Temp. Controller : PID Controller, 0-199.9° C

Digital Temp. Indicator : 0-199.9° C (with multi-channel switch)

With Standard make on/off switch, Mains Indicator etc.

•An ENGLISH instruction manual consisting of experimental procedures, block diagram etc. will be provided along with the Apparatus.

•The whole set-up is well designed and arranged on a rigid structure painted with industrial PU Pain

Utilities Required

•Electricity Supply: Single Phase, 220 V AC, 50 Hz, 5-15 Amp. Combined socket with earth connection. Earth voltage should be less than 5 volts.

•Wet Solid.

•Floor area required: 2.0m x 0.75m

Experimentation/Learning Objectives

•To study the drying characteristics of a solid under forced draft condition and determine the critical moisture content.

•To correlate the constant drying rate with air mass velocity.

Latest Products


Follow Videos