/ Industrial & Engineering Instruments / Mechanical Engineering Equipments / Heat & Mass Transfer Lab /

Fluidized Bed Dryer

$ 0 / Piece

Product Code MT-MT-144
Condition New
Stock Status Stock In
Minimum Order Quantity 1
Description This is a dryer in which moisture removal takes place by fluidization of solids particles by hot air. The set-up fitted with a specially designed, vertical Glass Column. The lower portion of the column is filled with fluidizing material. The material is supported on the screen mesh held between two flanges. Air from a compressor is heated in the heater box and passed through the column. Flow control and by-pass valve are fitted to regulate the airflow. ...
Interested in this AD
Get in touch with Seller

Product Description

Description

This is a dryer in which moisture removal takes place by fluidization of solids particles by hot air. The set-up fitted with a specially designed, vertical Glass Column. The lower portion of the column is filled with fluidizing material. The material is supported on the screen mesh held between two flanges. Air from a compressor is heated in the heater box and passed through the column. Flow control and by-pass valve are fitted to regulate the airflow. At the top outlet of column a cyclone is provided to collect any solid particles taken out by the air stream.

  Technical Details

Column Material Borosilicate Glass, Dia. 80 mm. Length 500mm
Cyclone Separator Material Stainless Steel, Compatible Capacity with collector.
Air Circulation By forced draft fan, Arrangement is done to vary the air flow rate.
Heating Chamber Compatible capacity
Heater  Nichrome wire heater
Temperature Sensors RTD PT-100 type.
Control panel comprises of 

Digital Temp. Controller : PID Controller, 0-199.9°C (For Hot Air)

With Standard make on/off switch, Mains Indicator etc. .

  • An ENGLISH instruction manual consisting of experimental procedures, block diagram etc. will be provided along with the Apparatus.
  • The whole set-up is well designed and arranged on a rigid structure painted with industrial PU Paint.

Experimentation/Learning Objectives

  • To study the fluidized bed drying.
  • To plot the drying curve under fluidized bed condition.

  Utilities Required

  • Electricity Supply: Single Phase, 220 V AC, 50 Hz, 5-15 Amp. Combined socket with earth connection. Earth voltage should be less than 5 volts.
  • Granular and free flowing solid: size 1-2 mm.

 

Latest Products


Follow Videos