/ Industrial & Engineering Instruments / Mechanical Engineering Equipments / Fluid Mechanics Lab /

Double Stage Air Compressor Test Rig

$ 0 / Piece

Product Code MTFM-205
Condition New
Stock Status Stock In
Minimum Order Quantity 1
Description The present set-up is designed to study the Double Stage Air compressor. The set-up consists of a double stage reciprocating type air compressor. It is driven by a motor through a belt and pulley system. The drive motor is swinging field type and supplied with dial type spring balance which permits direct torque measurement. This arrangement facilitates the end user to calculate the power transmitted by the motor to the compressor, accurately. To calculate input power to the motor...
Interested in this AD
Get in touch with Seller

Product Description

Description The present set-up is designed to study the Double Stage Air compressor. The set-up consists of a double stage reciprocating type air compressor. It is driven by a motor through a belt and pulley system. The drive motor is swinging field type and supplied with dial type spring balance which permits direct torque measurement. This arrangement facilitates the end user to calculate the power transmitted by the motor to the compressor, accurately. To calculate input power to the motor, an energy meter is provided and in this way, by knowing the input and output, efficiency of the compressor is calculated easily. The outlet of the air compressor is connected to air reservoir and suction is connected to another air manifold tank. The compressor draws air from this manifold tank which is provided with bellow at one side. This tank also has an orifice with manometer to observe and calculate the air flow rate. The compressed air from the outlet side of the compressor is stored in provided reservoir. The reservoir is equipped with Pressure Gauge, Control Valve, Safety Valve, Drain etc. An water cooled intercooler for air, in between both head, is provided to cool the hot and compressed air before entering the second stage. Temperature of inlet air, after single compression, inlet and outlet of second compression and pressure in reservoir and at intermediate stage can be measured by Temp. Sensorsand pressure gauges.

Technial
Compressor ouble Stage, Double Cylinder, Capacity 6.9 CFM max. Working Pressure: Max. 7 kg/cm2.
Drive 2 HP, Crompton/Standard make, Swinging Field type.
Manifold Tank Suitable Capacity.
Flow Measurement  Orifice meter with Differential Pressure Transmitter.
Temp. Measurement D PT-100 type sensor (4Nos.)
Air Tank apacity 150 Ltrs. with safety valve, control valve,
Control Panel Comprises of Digital Temperature Indicator TD PT-100 Type, 0-199°C.
RPM Measurement  PM Indicator with Proximity sensor.
Energy measuremen lectronic Energy meter, L&T make.
Control Panel Comprises of MCB For overload protection. Standard make On/Off Switch, Mains Indicator, etc.
  •  An ENGLISH instruction manual consisting of experimental procedures, block diagram etc. will be provided along with the Apparatus.
  • The whole set-up is well designed and arranged on a rigid structure painted with industrial PU Paint.

  Experimentation/Learning Objectives

••To calculate the volumetric efficiency.

••To calculate isothermal Horse Power.

••To calculate compression ratio.

Utilities Required

••Electricity supply: Single phase, 220V AC, 50 Hz, 5-15 Amp. combined socket with earth connection. Earth voltage should be less than 5 volts.

••Water supply : 1 LPM @ 1 Bar. ••Floor Drain Required.

••Floor Area: 2.5 m x 1.25 m.

Latest Products


Follow Videos