/ Industrial & Engineering Instruments / Mechanical Engineering Equipments / Chemical Engineering /

Continuous Stirred Tank Reactor

$ 0 / Piece

Product Code MTRE-101A
Condition New
Stock Status Stock In
Minimum Order Quantity 1
In an ideal CSTR (i.e. an ideal steady state flow reactor) the contents in reactor are well mixed and have uniform composition throughout. Thus the exit stream has the same composition as the fluid within the reactor. This type of reactor is known as mixed flow reactor. This set-up is used to study a non-catalytic homogeneous second order liquid phase reaction under ambient condition. The set up consists of two feed tanks through which two reactants are fed to the reactor. Rotameters are prov...
Interested in this AD
Get in touch with Seller

Product Description

In an ideal CSTR (i.e. an ideal steady state flow reactor) the contents in reactor are well mixed and have uniform composition throughout. Thus the exit stream has the same composition as the fluid within the reactor. This type of reactor is known as mixed flow reactor. This set-up is used to study a non-catalytic homogeneous second order liquid phase reaction under ambient condition. The set up consists of two feed tanks through which two reactants are fed to the reactor. Rotameters are provided to measure the individual flow of Chemicals. The flow rate can be adjusted by operating the needle valvesprovided on respective Rotameter. The compressed air is used for circulation of feed. The CSTR is fitted with stirrer for proper mixing. From top outlet of it samples are collected for analysis. Pressure Regulator, Pressure Gauge and Safety Valve are fitted in the compressed air line.

Technical Details ••Reactor : Material Stainless Steel, Capacity 2 Ltrs (Approx). ••Stirrer : Stainless Steel Impeller and shaft coupled with FHP Motor. ••Feed Tank (2Nos.) : Material Stainless Steel, Capacity - 20 Ltrs. (Approx). ••Feed Circulation : By compressed air. ••Flow Measurement : Rotameter 2Nos. (one each for Reactants). ••Piping : Stainless Steel and PU pipe. ••Pressure Regulator : 0-2 Kg/cm2••Pressure Gauge : Bourdon type 0-2 Kg/cm2••Control Panel comprises of : Standard make on off switch, Mains Indicator etc. ••An ENGLISH instruction manual consisting of experimental procedures, block diagram etc. will be provided along with the Apparatus. ••The whole set-up is well designed and arranged on a rigid structure painted with industrial PU Paint.

Experimentation/Learning Objectives••To study the progress of a suitable Chemical Reaction in CSTR. •To determine the Reaction Rate Constant.

Utilities Required••Electricity Supply: Single Phase, 220 V AC, 50 Hz, 5-15 Amp combined socket with earth connection. Earth voltage should be less than 5 volts. ••Compressed Air Supply: 2 CFM@1 bar ••Water Supply. ••Floor Area Required: 1 m x 0.75 m ••Floor Drain. ••Instruments, Laboratory Glassware and Chemicals required for analysis as per the system adopted.

Latest Products


Follow Videos