/ Industrial & Engineering Instruments / Mechanical Engineering Equipments / Chemical Engineering /

Computer Controlled - Isothermal Plug Flow Tubular

$ 0 / Piece

Product Code MTRE-107B/CC
Condition New
Stock Status Stock In
Minimum Order Quantity 1
In an ideal Plug Flow Reactor (PFTR) there is no mixing in the direction of flow and complete mixing perpendicular to direction of flow. Concentration of reactants varies along the length of reactor but not in radial direction. In case of a coil turbulence is introduced due to frequent change in direction of flow and presence of secondary flow, so a higher value of reaction rate constant is expected in coil tube type plug flow reactor. This set-up is used to study a non-catalytic homogeneous ...
Interested in this AD
Get in touch with Seller

Product Description

In an ideal Plug Flow Reactor (PFTR) there is no mixing in the direction of flow and complete mixing perpendicular to direction of flow. Concentration of reactants varies along the length of reactor but not in radial direction. In case of a coil turbulence is introduced due to frequent change in direction of flow and presence of secondary flow, so a higher value of reaction rate constant is expected in coil tube type plug flow reactor. This set-up is used to study a non-catalytic homogeneous reaction under isothermal condition. The set up consists of two feed tanks through which two reactants are fed to the reactor. Peristaltic pumps are provided to measure the individual flow of Chemicals. The flow rate can be varied by changing the speed of peristaltic pump. It is a helical coil tube type reactor kept in a constant temperature water bath to conduct theexperiment at various temperatures. Reactants enter at lower end coming out of the top of coil from where samples are collected for analysis. The present set-up has a facility to interface the system with computer which enables to log the experimentaldata using computer. The educational software and data-logging package has been developed for unit. The software environment base is of Labview of NATIONALINSTRUMENTS, USA. This software is compatible to interfacing unit designed by K. C. Engineers. This software package provides a comprehensive educational software environment within which the investigations can be performed. This software is capable to tabulate thesample readings according to the requirement of experiment under study and results obtained can be compared. The real time data acquisition can be done by interfacing the set-up with computer using software. Software allows the user to have control on data logging, printing the stored data, preparing spread sheets in Excel etc.

•Reactor : Material Stainless Steel, Capacity (0.6-0.7) Ltrs. (approx) (Helical Coiled Tube Type) ••Water Bath : Material Stainless Steel, Double wall, insulated with Ceramic Wool. ••Heater : Nichrome wire Heater ••Stirrer (Water Bath) : Material SS Impeller and shaft coupled with FHP motor ••Feed Tank (2Nos.) : Material Stainless Steel, Capacity 20 Ltrs. ••Feed Circulation : By Peristaltic Pump (2Nos.), computer controlled for different RPM ••Piping : Stainless Steel and Silicon pipe. ••Product Analysis : By Electronic Sensor (1No.), Output 4-20 mA. ••Temp. Measurement : Temp. Transmitter (1No.) 0-200°C ••Control panel comprises of : Digital Temp. Controller : PID Controller, 0-199.9°C, (For Water Bath) With Standard make on/off switch, Mains Indicator etc. ••An ENGLISH instruction manual consisting of experimental procedures, block diagram etc. will be provided along with the Apparatus. ••The whole set-up is well designed and arranged on a rigid structure painted with industrial PU Paint.

•Saponification Reaction study in Isothermal Plug Flow Reactor. ••To determine Reaction Rate Constant and effect of temperature on it.

•Electricity Supply: Single Phase, 220 V AC, 50 Hz, 5-15 Amp combined socket with earth connection. Earth voltage should be less than 5 volts. ••Water Supply & Floor Drain. ••Instruments, Laboratory wares and Chemicals required for analysis as per the system adopted. ••Computer System: i-3 processor with DVD Drive, Windows 7, MS-Office pre-loaded. One USB slot required in PC for Data Acquisition Card.

Latest Products


Follow Videos